Li-Battery Protection

___Power Management > Li-Battery Protection IC___

___Part No.___ ______ (勾選方式)	___Features___	___Vcc(V)___ ______ (勾選方式)	___Series Cells___ ______ (勾選方式)	___Overcharge___ ___Detection___ ___Voltage(V)___ ______ (勾選方式)	___Overcharge___ ___Release___ ___Voltage(V)___ ______ (勾選方式)	___Over discharge___ ___Detection___ ___Voltage(V)___ ______ (勾選方式)	___Over discharge___ ___Release___ ___Voltage(V)___ ______ (勾選方式)	___Package___ ______ (勾選方式)
___UB227___	___1-CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC___ ______ ___* Wide Supply Voltage Range: VDD=1.5V~8.0V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.9V)___ ___* Ultra-Low Power-Down Current: IPDN=0.1μA (VDD=2.0V)___ ___* Overcharge Detection Voltage: VCU=3.9V~4.4V___ ___* Overcharge Release Voltage: VCL=3.8V~4.4V___ ___* Over Discharge Release Voltage: VDL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VDU=2.0V~3.4V___ ___* Discharge Over Current Detection Voltage: VDIOV=0.05V~0.30V___ ___* Discharge Short Circuit Detection Voltage: VSHORT=0.85V (Fixed)___ ___* Charge Over Current Voltage: VCIOV=-0.115V (Fixed)___ ___* Charger Detection Voltage: VCHA=-0.7V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___12.0___	___1___	___3.9~4.4___	___3.8~4.4___	___2.0~3.0___	___2.0~3.4___	___SOT-26___
___UB240___	___Li-Battery Protection IC 2nd Level Protection For 1 to 4 Cells Battery Pack.___ ______ ___* High-accuracy voltage detection circuit for each cell___ ___* Overcharge detection voltage n (n=1 to 4): 4.05V to 4.50V (in 50mV steps)___ ___* Overcharge hysteresis voltage n (n=1 to 4): 0.25V±0.07V,0.30V±0.10V___ ___* Delay times for overcharge detection can be set by an external capacitor___ ___* CMOS output active “H”___ ___* Wide operating voltage range 3.6V to 24V___ ___* Wide operating temperature range −40°C to +85°C___ ___* Low current consumption: 1.5μA typ. (+25°C) at 3.5V for each cell___	___4.0~25.0___	___4___	___4.05~4.5___	___-___	___-___	___-___	___SOP-8___ ___TSSOP-8___
___UB241___	___1-CELL ITHIUM-ION/POLYMER___ ___BATTERY PROTECTION IC * Wide Supply Voltage Range: VDD=1.5V~8.0V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.5V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=1.5V)___ ___* Overcharge Detection Voltage: VCU=3.9V~4.4V___ ___* Overcharge Release Voltage: VCL=3.8V~4.4V___ ___* Over Discharge Release Voltage: VDL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VDU=2.0V~3.4V___ ___* Over Current 1 Detection Voltage: VIOV1=0.05V~0.30V___ ___* Over Current 2 Detection Voltage: VIOV2=0.5V (Fixed)___ ___* Short Circuit Detection Voltage: VSHORT=-1.2V (Fixed, based on VDD)___ ___* Charger Detection Voltage: VCHA=-0.7V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.5~8.0___	___1___	___3.9~4.4___	___3.8~4.4___	___2.0~3.0___	___2.0~3.4___	___SOT-25___
___UB211C___	___1-Cell Lithium-Ion/Polymer Battery Protection IC___ ___AA: VCU=4.2V、VCL=4.1V、VDL=2.8V、VDU=2.9V、VDIOV=0.15V___ ___AB: VCU=4.28V、VCL=4.13V、VDL=2.8V、VDU=3.1V、VDIOV=0.15V___ ______ ___* Wide Supply Voltage Range: VDD=1.5V~8.0V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.5V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=1.5V)___ ___* Overcharge Detection Voltage: VCU=3.9V~4.4V___ ___* Overcharge Release Voltage: VCL=3.8V~4.4V___ ___* Over Discharge Release Voltage: VDL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VDU=2.0V~3.4V___ ___* Discharge Over Current Detection Voltage: VDOIV=0.05V~0.30V___ ___* Discharge Short Circuit Detection Voltage: VSHORT=0.5V (Fixed)___ ___* Charge Over Current Voltage: VCOIV=-0.1V (Fixed)___ ___* Charger Detection Voltage: VCHA=-0.7V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit.___ ___(External Capacitors are Unnecessary.)___	___1.5~8.0___	___1___	___3.9~4.4___	___3.8~4.4___	___2.0~3.0___	___2.0~3.4___	___SOT-25___
___UB242___	___Li-Battery Protection IC Protection For Single Cell Pack VCU=4.25V~4.325V、VDL=2.25V~2.50V___ ______ ___* Wide supply voltage range: VDD=1.8V~6.5V___ ___* Ultra-low quiescent current: IDD=3.0μA (VDD=3.5V)___ ___* Ultra-low power-down current: IPD=0.2μA (VDD=2.0V)___ ___* Overcharge detection voltage: VOCU=4.200V~4.400V___ ___* Overcharge release voltage: VOCR=4.005V~4.225V___ ___* Over discharge detection voltage : VODL=2.15V~3.00V___ ___* Over discharge release voltage: VODR=2.32V~3.10V___ ___* Over current detection voltage: VOI1=0.10V~0.20V___ ___* Short circuit detection voltage: VOI2=1.35V (Fixed)___ ___* Charger detection voltage: VCH=-0.7V___ ___Reset resistance for over current protection: RSHORT＞500kΩ___ ___* Delay times are generated by an internal circuit.___ ___(External capacitors are unnecessary.)___	___1.8~6.5___	___1___	___4.2~4.4___	___4.005~4.225___	___2.15~3___	___2.32~3.1___	___SOT-26___
___UB2421___	___One Cell Lithium-ion/Polymer Battery Protection IC___ ______ ___* Wide supply voltage range: VDD=1.8V~6.5V___ ___* Ultra-low quiescent current: IDD=3.0μA (VDD=3.5V)___ ___* Ultra-low power-down current: IPD=0.2μA (VDD=2.0V)___ ___* Overcharge detection voltage: VOCU=4.30V±0.05V___ ___* Overcharge release voltage: VOCR=4.10V±0.05V___ ___* Overdischarge release voltage: VODL=2.40V±0.10V___ ___* Overdischarge release voltage: VODR=3.00V±0.10V___ ___* Over current detection voltage: VOI1=0.15V±0.05V___ ___* Short circuit detection voltage: VOI2=1.35V (Fixed)___ ___* Charger detection voltage: VCH=-0.7V___ ___* Delay times are generated by an internal circuit.___ ___(External capacitors are unnecessary.)___	___1.8~6.5___	___1___	___4.3___	___4.1___	___2.4___	___3.0___	___SOT-26___
___UB2422___	___One Cell Lithium-ion/Polymer Battery Protection IC___ ______ ___* Wide Supply Voltage Range: VDD=1.8V~6.5V___ ___* Ultra-Low Quiescent Current: IDD=3.0μA (VDD=3.5V)___ ___* Ultra-Low Power-Down Current: IPD=0.2μA (VDD=2.0V)___ ___* Overcharge Detection Voltage: VOCU=3.9V~4.5V___ ___* Overcharge Release Voltage: VOCR=3.8V~4.5V___ ___* Over Discharge Release Voltage: VODL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VODR=2.0V~3.0V___ ___* Over Current Detection Voltage: VOI1=0.10V~0.20V___ ___* Short Circuit Detection Voltage: VOI2=1.2V (Fixed)___ ___* Charger detection voltage: VCH=-0.7V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.8~6.5___	___1___	___3.9~4.5___	___3.8~4.5___	___2.0~3.0___	___2.0~3.0___	___SOT-26___
___UB3421___	___1-CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC___ ______ ___* Wide Supply Voltage Range: VDD=1.8V~6.5V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.5V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=2.0V)___ ___* Overcharge Detection Voltage: VCU=3.9V~4.4V___ ___* Overcharge Release Voltage: VCL=3.8V~4.4V___ ___* Over Discharge Release Voltage: VDL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VDU=2.0V~3.4V___ ___* Over Current 1 Detection Voltage: VIOV1=0.10V~0.20V___ ___* Over Current 2 Detection Voltage: VIOV2=0.5V (Fixed)___ ___* Short Circuit Detection Voltage: VSHORT=1.2V (Fixed)___ ___* Charge overcurrent detection voltage: VCIP=-0.2V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.8~6.5___	___1___	___3.9~4.4___	___3.8~4.4___	___2.0~3.0___	___2.0~3.4___	___SOT-26___
___UB24205___	___Li-Battery Protection IC With Internal MOSFETs. Protection For Single Cell Pack VCU=4.25V、VDL=2.25V___ ______ ___* Wide supply voltage range: VDD=1.8V~9.0V___ ___* Ultra-low quiescent current: IDD=3.0μA (VDD=3.9V)___ ___* Ultra-low power-down current: IPD=0.1μA (VDD=2.0V)___ ___* Overcharge detection voltage: VOCU=4.250V±0.050V___ ___* Overcharge release voltage: VOCR=4.055V±0.050V___ ___* Over discharge release voltage: VODL=2.250V±0.100V___ ___* Over discharge detection voltage: VODR=2.850V±0.100V___ ___* Over current detection voltage: VOI1= 0.150V±0.030V___ ___* Short circuit detection voltage: VOI2=1.35V (Fixed)___ ___* Charger detection voltage: VCH=-0.7V___ ___* Reset resistance for over current protection: RSHORT>500kΩ___ ___* No external MOSFETs___ ___* Delay times are generated by an internal circuit (External capacitors are unnecessary).___ ___* Halogen Free___	___1.8~9.0___	___1___	___4.25___	___4.055___	___2.25___	___2.85___	___SOP-8 ___
___UB261___	___Battery Protection IC Protection For Single Cell Pack VCU=3.9V~4.4V、VDL=2.0V~3.0V___ ______ ___* Wide Supply Voltage Range: VDD=1.5V~8.0V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.5V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=1.5V)___ ___* Overcharge Detection Voltage: VCU=3.9V~4.4V___ ___* Overcharge Release Voltage: VCL=3.8V~4.4V___ ___* Over Discharge Release Voltage: VDL=2.0V~3.0V___ ___* Over Discharge Release Voltage: VDU=2.0V~3.4V___ ___* Over Current 1 Detection Voltage: VIOV1=0.05V~0.30V___ ___* Over Current 2 Detection Voltage: VIOV2=0.5V (Fixed)___ ___* Short Circuit Detection Voltage: VSHORT=1.2V (Fixed)___ ___* Charger Detection Voltage: VCHA=-0.7V (Fixed)___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.5~8.0___	___1___	___3.9~4.4___	___3.8~4.4___	___2.0~3.0___	___2.0~3.4___	___SOT-26___
___UB262___	___Battery Protection IC Protection For Single Cell Pack VCU=4.25V~4.35V、VDL=2.9V~3.0V___ ___* High-accuracy voltage detection circuit___ ___Overcharge detection voltage: 4.250~4.350V, Accuracy: ±50Mv___ ___Overcharge release voltage: 4.050~4.150V, Accuracy: ±50mV___ ___Overdischarge detection voltage: 2.30~2.90V, Accuracy: ±100mV___ ___Overdischarge release voltage: 2.90~3.00V, Accuracy: ±100mV___ ___Discharge overcurrent detection voltage: 150mV, Accuracy: ±30mV___ ___Short-circuiting detection voltage: 0.85V (fixed), Accuracy: ±300mV___ ___* Delay times are generated by an internal circuit (external capacitors are unnecessary)___ ___Overcharge delay time: 100ms (typ.)___ ___Overdischarge delay time: 25ms (typ.)___ ___Discharg e overcurrent delay time: 10ms (typ.)___ ___Short circuit delay time: 500μs (typ.)___ ___* Low current consumption (Products with Power-down Function)___ ___Operation mode: 3.0μA typ., 6.0μA max. (VDD=3.9V)___ ___Ultra low power-down current: 0.1μA max. (VDD=2.0V)___ ___* High-withstanding-voltage device is used for charger connection pins (CS pin and OC pin: Absolute maximum rating=20V)___ ___* 0 V battery charge function “available” / “unavailable” are selectable.___ ___* Wide operating temperature range: -40°C~+85°C___	___1.5~8.0___	___1___	___4.25~4.35___	___4.05~4.15___	___2.3~2.9___	___2.9~3.0___	___SOT-26___
___UB209A___	___Li-Ion Battery Protection IC For Series Multi-Cell VCU=3.8V~4.25V___ ______ ___* Settable delay time by external capacitor for output pin___ ___* High-accuracy voltage detection circuit___ ___* Two types of cell-balance function: charge/discharge___ ___* Control charging, discharging, cell-balance by CTLC, CTLD pins___ ___* Low current consumption: 8.0μA max___ ___* Wide range of operation temperature (-40°C ~ +85°C)___	___1.5~8.0___	___1___	___3.8~4.3___	___3.5~4.2___	___2.0~3.0___	___2.4~3.3___	___TSSOP-8___ ___SOP-8___
___UB209B___	___Li-Ion Battery Protection IC For Series Multi-Cell VCU=3.8V~4.25V___ ______ ___* Settable delay time by external capacitor for output pin___ ___* High-accuracy voltage detection circuit___ ___* Two types of cell-balance function: charge/discharge___ ___* Control charging, discharging, cell-balance by CTLC___ ___,CTLD pins___ ___* Low current consumption: 8.0μA max___ ___* Wide range of operation temperature (-40°C~+85°C)___	___1.5~8.0___	___1___	___3.8~4.25___	___3.5~4.1___	___2.0~3.0___	___2.4~3.3___	___TSSOP-8___ ___SOP-8___
___UB244A___	___Li-Ion Battery Protection IC For 1-Cell To 4-Cell Pack VCU=4.05V~4.5V___ ______ ___* High-accuracy voltage detection circuit for each cell___ ___* Overcharge detection voltage n (n=1 to 4): 4.05V to 4.50V (in 50mV steps)___ ___* Overcharge hysteresis voltage n (n=1 to 4): 0.38V±0.10V, 0.25V±0.07V, 0.13V±0.04V, 0.045V±0.02V, None___ ___* Delay times for overcharge detection can be set by an external capacitor___ ___* CMOS output active “H”___ ___* Wide operating voltage range 3.6V to 24V___ ___* Wide operating temperature range −40°C to +85°C___ ___* Low current consumption: 1.5μA typ. (+25°C) at 3.5V for each cell___	___3.6~24___	___4___	___4.05~4.5___	___-___	___-___	___-___	___MSOP-8___
___UB264A___	___Li-Ion Battery Protection IC For 2-Cell To 4-Cell Pack VCU=4.3V~4.5V___ ______ ___* High-accuracy voltage detection circuit for each cell___ ___* Overcharge detection voltage n (n=1 to 4): 4.30V to 4.80V (in 50mV steps)___ ___* Overcharge hysteresis voltage n (n=1 to 4): -0.52V±0.21V___ ___,−0.39V±0.16V, −0.26V±0.11V, −0.13V±0.06V, None___ ___* Delay times for overcharge detection can be set by an internal circuit without external capacitors___ ___* Output control function via CTL pin___ ___* CMOS output active “H”___ ___* Wide operating voltage range 3.6V to 24V___ ___* Wide operating temperature range −40°C ~ +85°C___ ___* Low current consumption: 2.5μA typ. (+25°C) at 3.5V for each cell___	___3.6~24___	___4___	___4.3~4.8___	___-___	___-___	___-___	___TSSOP-8___
___UB264B___	___Li-Ion Battery Protection IC For 2-Cell To 4-Cell Pack VCU=4.3V~4.5V___ ______ ___* High-accuracy voltage detection circuit for each cell___ ___* Overcharge detection voltage n (n=1 to 4): 4.30V to 4.80V (in 50mV steps)___ ___* Overcharge hysteresis voltage n (n=1 to 4): -0.52V±0.21V___ ___,−0.39V±0.16V, −0.26V±0.11V, −0.13V±0.06V, None___ ___* Delay times for overcharge detection can be set by an internal circuit without external capacitors___ ___* Output latch function after overcharge detection___ ___* CMOS output active “H”___ ___* Wide operating voltage range 3.6V to 24V___ ___* Wide operating temperature range −40°C to +85°C___ ___* Low current consumption: 2.5μA typ. (+25°C) at 3.5V for each cell___	___3.6~24___	___4___	___4.3~4.8___	___-___	___-___	___-___	___TSSOP-8___
___UB280___	___1-CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC___ ___* Wide Supply Voltage Range: VDD=1.5V~10V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.9V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=2.0V)___ ___* Overcharge Detection Voltage: VDET1=4.05V~4.35V___ ___* Overcharge Release Voltage: VREL1=3.8V~4.25V___ ___* Over Discharge Detection Voltage: VDET2=2.2V~3.1V___ ___* Over Discharge Release Voltage: VREL2=2.3V~3.3V___ ___* Discharge Over Current Detection Voltage: VDET3=0.07V~0.23V___ ___* Discharge Short Circuit Detection Voltage: VSHORT=0.9V___ ___* Over Voltage Charger Detection Voltage: VCHG1=8.0V___ ___* Charger Detection Voltage: VCHA=-0.7V___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.5~10.0___	___1___	___4.05~4.35___	___3.8~4.25___	___2.2~3.1___	___2.3~3.3___	___SOT-26___
___UB291___	___1-CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC___ ______ ___* Wide Supply Voltage Range: VDD=1.5V~10V___ ___* Ultra-Low Quiescent Current: IOPE=3.0μA (VDD=3.9V)___ ___* Ultra-Low Power-Down Current: IPDN=0.2μA (VDD=2.0V)___ ___* Overcharge Detection Voltage: VDET1=4.05V~4.35V___ ___* Overcharge Release Voltage: VREL1=3.8V~4.25V___ ___* Over Discharge Detection Voltage: VDET2=2.2V~3.1V___ ___* Over Discharge Release Voltage: VREL2=2.3V~3.3V___ ___* Discharge Over Current Detection Voltage: VDET3=0.07V~0.23V___ ___* Discharge Short Circuit Detection Voltage: VSHORT=0.5V___ ___* Charge Over Current Voltage: VDET4=-0.1V___ ___* Charger Detection Voltage: VCHA=-0.7V___ ___* Delay Times are Generated by an Internal Circuit. (External Capacitors are Unnecessary.)___	___1.5~10.0___	___1___	___4.05~4.35___	___3.8~4.25___	___2.2~3.1___	___2.3~3.3___	___SOT-26___
___UCM101___	___Bidirectional Precision High-Side Current Monitor___ ______ ___* Low operating current___ ___* High side voltage (2.7~20V)___ ___* A fixed gain of 10___ ___* High accuracy (typ=1%)___	___2.7~20.0___	___-___	___-___	___-___	___-___	___-___	___SOT-25___
___UCM102___	___High-Side Current Monitor___ ______ ___* Low operating current___ ___* High side voltage (2.5~20V)___ ___* High accuracy (typ=1%)___	___2.5~20.0___	___-___	___-___	___-___	___-___	___-___	___SOT-23-3___
___UB3860___	___BATTERY VOLTAGE AND___ ___CURRENT PROTECTION IC___ ______ ___* Voltage detection and release___ ___Overcharge Detection Voltage___ ___Overcharge Release Voltage___ ___Overdischarge Detection Voltage___ ___Overdischarge Release Voltage___ ___* Current detection and release___ ___Discharge Overcurrent Detection Voltage___ ___Charge Overcurrent Detection Voltage___ ___Load Short-Circuit Detection Voltage___ ___* 0V Battery Charge Inhibition Battery Voltage___ ___* Operation Modes___ ___Normal Mode 2.5uA (Typ.) 4.0uA (Max.)___ ___Standby Mode 1.0uA (Typ.) 1.5uA (Max.)___ ___Power Down Mode 0.1uA (Max.)___	___1.5~5.5___	___1___	___4.475___	___4.275___	___2.5___	___2.9___	___DFN1616-6___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."