RS-232 Transceiver

___INTERFACE > RS-232 Transceiver___

___Part No.___ ______ (勾選方式)	___Features___	Vcc(MIN)(V) (Range)	Vcc(MAX)(V) (Range)	___Drivers per package___ ______ (勾選方式)	___Receivers per package___ ______ (勾選方式)	___Data rate (Max) (kbps)___ ______ (勾選方式)	___Vout (Typ) (V)___ ______ (勾選方式)	___Package___ ______ (勾選方式)
___75185___	___Multiple RS-232 Driver & Receiver___ ______ ___Single Chip with Easy Interface between UART and Serial-Port connector of PC.___ ___Three Drivers and five Receivers Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards.___ ___*Designed to Support Data Rates up to 120 kbps___	4.5	5.5	___3___	___5___	___120___	___7.5___	___DIP-20___ ___SOP-20 SSOP-20N___ ___TSSOP-20___
___75323___	___Multiple RS-232 Driver & Receiver___ ______ ___* Single chip with easy interface between UART and serial-port___ ___connector___ ___* Data rates : 20 kb/s.___ ___* Complement to the UTC 75232.___	4.5	5.5	___5___	___3___	___120___	___7.5___	___DIP-20___ ___SOP-20___
___75232___	___Multiple RS-232 Driver & Receiver___ ______ ___* Single chip with easy interconnection of the UART and___ ___serial-port connector of personal computer.___ ___* Meets standard TIA/EIA-232-F and ITU V.28___ ___* Up to 120 kbps data rate___ ___* 20-pin SOP/ DIP/SSOP/TSSOP packages___	4.5	5.5	___3___	___5___	___120___	___7.5___	___DIP-20___ ___SOP-20 SSOP-20N___ ___TSSOP-20___
___UT213___	___Enhanced RS-232 Drivers & Receivers___ ______ ___* Operates With 4.5V~5.5V Power Supply___ ___* Four Drivers and Five Receivers___ ___* Designed to Transmit at a Data Rate of 120 kbps___ ___* Low Standby Current (15μA Typical)___ ___* Serial-Mouse Drivability___ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___	4.5	5.5	___4___	___5___	___120___	___5.4___	___SOP-28 SSOP-28___
___UT232E___	___Enhanced RS-232 Drivers & Receivers___ ______ ___* Single power supply: 3.0V~5.5V___ ___* Low power supply current: 3.0mA___ ___* Multiple drivers and receivers___ ___* Receiver input levels: ±25V___ ___* 3-State outputs of TTL/CMOS receiver___ ___* High output slew rate: 10V/μs under load___ ___* High data rate: 120kbps under load___ ___* Four external small charge pump capacitors: 0.1μF___ ___* Exceeds ±8KV HBM ESD protection for RS-232 I/O pins___	3.3	5.5	___2___	___2___	___120___	___6___	___DIP-16___ ___SOP-16___ ___SSOP-16N___
___UTRS3202___	___MULTICHANNEL RS-232 LINE TRANSCEIVERS___ ______ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___ ___* Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards___ ___* Operates With 3.0V to 5.5V VCC Supply___ ___* Operates Up To 250kbit/s Data Rate___ ___* Two Drivers and Two Receivers___ ___* External Capacitors 4×0.1μF___ ___* Accepts 5.0V Logic Input With 3.3V Supply___	3	5.5	___2___	___2___	___150___	___5.4___	___SOP-16 TSSOP-16___
___UT3221/E___	___MULTICHANNEL RS-232 LINE TRANSCEIVERS___ ______ ___* Operates With 3.0V to 5.5V Power Supply___ ___* One Driver and One Receiver___ ___* Operates Up To 250 kbps___ ___* Designed to Transmit at a Data Rate of 250 kbps___ ___* Low Standby Current (1μA Typical)___ ___* External Capacitors (40.1μF)___ ___ Accepts 5.0V Logic Input With 3.3V Supply___ ___* Serial-Mouse Drivability___ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___	3	5.5	___1___	___1___	___250___	___5.4___	___TSSOP-16 SSOP-16___
___UT3222___	___MULTICHANNEL RS-232 LINE TRANSCEIVERS___ ______ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___ ___* Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards___ ___* Operates With 3.0V to 5.5V VCC Supply___ ___* Operates Up To 250kbit/s Data Rate___ ___* Two Drivers and Two Receivers___ ___* Low Standby Current 1μA Typical___ ___* External Capacitors 4×0.1μF___ ___* Accepts 5.0V Logic Input With 3.3V Supply___	3	5.5	___2___	___2___	___150___	___5.4___	___TSSOP-20___ ___SSOP-20N___
___UT3223___	___RS-232 Transceivers with AutoShutdown___ ______ ___* Operates With 3.0V~5.5V Power Supply___ ___* Two Drivers and Two Receivers___ ___* Operates Up To 250 kbps___ ___* Designed to Transmit at a Data Rate of 250 kbps___ ___* Low Standby Current (1μA Typical)___ ___* External Capacitors (40.1μF)___ ___ Accepts 5.0V Logic Input With 3.3V Supply___ ___* Serial-Mouse Drivability___ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___	3	5.5	___2___	___2___	___150___	___5.4___	___TSSOP-20___ ___SSOP-20N___
___UTRS3227___	___RS-232 Transceivers with AutoShutdown___ ______ ___* Operates With 3.0V to 5.5V Power Supply___ ___* One Driver and one Receiver___ ___* Operates Up To 1Mbps___ ___* Designed to Transmit at a Data Rate of 1Mbps___ ___* Low Standby Current (1μA Typical)___ ___* External Capacitors (4×0.1μF)___ ___* Accepts 5.0V Logic Input With 3.3V Supply___ ___* Serial-Mouse Drivability___ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___	3	5.5	___1___	___1___	___250___	___5.4___	___SSOP-16___ ___TSSOP-20___
___UT3232___	___True RS-232 Transceivers___ ______ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___ ___* Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards___ ___* Operates With 3.0V to 5.5V VCC Supply___ ___* Operates Up To 250kbit/s Data Rate___ ___* Two Drivers and Two Receivers___ ___* External Capacitors 4×0.1μF___ ___* Accepts 5.0V Logic Input With 3.3V Supply___	3	5.5	___2___	___2___	___250___	___5.4___	___SOP-16___ ___SSOP-16 SSOP-16N___ ___TSSOP-16___
___UTRS3238___	___+3.3V TO +5.0V POWER SUPPLY, 250KBPS, RS-232 LINE DRIVERS/RECEIVERS___ ______ ___* Operates With 3.3V~5.0V Power Supply___ ___* Five Drivers and Three Receivers___ ___* Operates Up To 250 kbps___ ___* Designed to Transmit at a Data Rate of 250 kbps___ ___* Low Standby Current (1μA Typical)___ ___* External Capacitors (40.1μF)___ ___ Accepts 5.0V Logic Input With 3.3V Supply___ ___Always-Active Non-inverting Receiver Output (R1OUTB)___ ___ Serial-Mouse Drivability___ ___* Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins___	3.3	5	___5___	___3___	___250___	___5___	___TSSOP-28___
___UT3243A___	___3.0V TO +5.5V POWER SUPPLY, 235KBPS,MULTICHANNAEL RS-232 LINE DRIVERS/RECEIVERS___ ______ ___* Operates With 3.0V ~ 5.5V Power Supply___ ___* Three Drivers and Five Receivers___ ___* Operates Up To 235 kbps___ ___* Designed to Transmit at a Data Rate of 235 kbps___ ___* Low Standby Current (1uA Typical)___ ___* External Capacitors (4×0.1μF)___ ___* Accepts 5.0V Logic Input With 3.3V Supply___ ___* Always-Active Non-inverting Receiver Output (R2OUTB)___ ___* Serial-Mouse Drivability___ ___* ESD(HBM) Protected ±15KV(MIN.) for RS-232 Pins___	3	5.5	___3___	___5___	___120___	___5.4___	___SSOP-28 TSSOP-28___ ___QFN-32(5×5)___
___UT5232___	___3.0V TO +5.5V POWER SUPPLY, 235KBPS,MULTICHANNAEL RS-232 LINE DRIVERS/RECEIVERS___ ______ ___* Operates With 3.0V ~ 5.5V Power Supply___ ___* Three Drivers and Five Receivers___ ___* Operates Up To 235 kbps___ ___* Designed to Transmit at a Data Rate of 235 kbps___ ___* Low Standby Current (1uA Typical)___ ___* External Capacitors (4×0.1μF)___ ___* Accepts 5.0V Logic Input With 3.3V Supply___ ___* Always-Active Non-inverting Receiver Output (R2OUTB)___ ___* Serial-Mouse Drivability___ ___* ESD(HBM) Protected ±15KV(MIN.) for RS-232 Pins___	3	5.5	___3___	___5___	___120___	___5.4___	___SSOP-28 TSSOP-28___ ___QFN-32(5×5)___
___75232A___	___Multiple RS-232 Driver & Receiver___ ______ ___* Single chip with easy interconnection of the UART and___ ___serial-port connector of personal computer.___ ___* Meets standard TIA/EIA-232-F and ITU V.28___ ___* Up to 120 kbps data rate___ ___* 20-pin SOP/ DIP/SSOP/TSSOP packages___	4.5	5.5	___3___	___5___	___120___	___7.5___	___DIP-20___ ___SOP-20 SSOP-20N___ ___TSSOP-20___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."