Leakage Current Detector

___Other Application IC > Leakage Current Detector___

___Part No.___ ______ (勾選方式)	___Features___	___VCC(V)___	___Package___
___GF2140___	___Low Power 2-Wire Ground Fault Interrupter___ ______ ___* Directly powered from the AC line___ ___* Build-in bridge rectifer___ ___* Interface to SCR___ ___* Adjustable trip current and time delay___ ___* Minimum external components___ ___* For two-wire system___ ___* Be used in 110V or 220V system___	___6.5___ ___Regulated___	___SOP-8___
___GF4141___	___LOW POWER GROUND FAULT___ ___INTERRUPTER___ ___* Powered from the AC line___ ___* Low quiescent current___ ___* Built-in diode rectifier___ ___* Direct interface to SCR___ ___* Precision sense amplifier___ ___* Time delay___ ___* For use with 110V or 220V systems___	___26___ ___VREG___	___SOP-8___
___GF4146___	___GROUND FAULT INTERRUPTER___ ______ ___* For Two-Wire ALCI and RCD Applications___ ___* Precision Sense Amplifier and Bandgap Reference___ ___* Built-in AC Rectifier___ ___* Direct DC Coupled to Sense Coil___ ___* Low-Voltage SCR Disable___ ___* Adjustable Sensitivity___ ___* Built-in Noise Filter___ ___* SCR Gate Driver___ ___* Minimum External Components___ ___* Ideal for 120V or 220V Systems___	___16___	___SOT-26___
___GF4147___	___GROUND FAULT___ ___INTERRUPTER___ ___* For GFCI and RCD Applications___ ___* Built-in AC Rectifier___ ___* Built-in Noise Filter___ ___* Low-Voltage SCR Disable___ ___* Direct DC Coupled to Sense Coil___ ___* SCR Gate Driver___ ___* Adjustable Sensitivity___ ___* Low Quiescent Current___ ___* Minimum External Components___ ___* Ideal for 120V or 220V Systems___	___12.7___ ___VREG___	___SOT-26___
___GF4149___	___GROUND FAULT___ ___INTERRUPTER___ ___* Precision Sense Amplifier and Bandgap Reference___ ___* Low-VOS Offset___ ___* Built-in Noise Filter___ ___* High-Current SCR Gate Driver___ ___* Adjustable Sensitivity___ ___* Low Quiescent Current___ ___* Minimum External Components___ ___* Ideal for 120V or 220V Systems___	___14___ ___VREG___	___SOT-26___
___M54133___	___Earth Leakage Current Detector( EIOH1&2 = ±20%)___ ______ ___* Improvement of ability against unwanted tripping by___ ___lightning-surge and lightning impulse.___ ___Two times counting system adopted.___ ___* Improvement of ability against unwanted tripping by___ ___inverter-noise.___ ___Built-in operational amplifier (of low current dissipation) for active___ ___low-pass filter.___ ___Improved high-frequency, high harmonic superposition___ ___performance___ ___* Internal time delay function___ ___* An external capacitor is used to set the delay time.___ ___* High input sensitivity: VT=11.5mVrms Typ.___ ___* Low-current dissipation (at RIREF=180kΩ)___ ___In stand-by condition: IS=610μA Typ.___ ___* High stabilities design___ ___Adopt the circuits that is not affected by fluctuations of supply___ ___voltage/ambient temperature.___	___7.0 ~ 12.0___	___SOP-16___
___M54133A___	___EARTH LEAKAGE CURRENT___ ___DETECTOR___ ___* Improvement of ability against unwanted tripping by___ ___lightning-surge and lightning impulse.___ ___Two times counting system adopted.___ ___* Improvement of ability against unwanted tripping by___ ___inverter-noise.___ ___Built-in operational amplifier (of low current dissipation) for active___ ___low-pass filter.___ ___Improved high-frequency, high harmonic superposition___ ___performance___ ___* Internal time delay function___ ___* An external capacitor is used to set the delay time.___ ___* High input sensitivity: VT=11.5mVrms Typ.___ ___* Low-current dissipation (at RIREF=180kΩ)___ ___In stand-by condition: IS=610μA Typ.___ ___* High stabilities design___ ___Adopt the circuits that is not affected by fluctuations of supply___ ___voltage/ambient temperature.___	___7.0 ~ 12.0___	___SOP-16___ ___SOP-16N___
___M54134___	___Earth Leakage Current Detector( EIOH1&2 = ±10%)___ ______ ___* Improvement of ability against unwanted tripping by___ ___lightning-surge and lightning impulse.___ ___Two times counting system adopted.___ ___* Improvement of ability against unwanted tripping by___ ___inverter-noise.___ ___Built-in operational amplifier (of low current dissipation) for active___ ___low-pass filter.___ ___Improved high-frequency, high harmonic superposition___ ___performance___ ___* Internal time delay function___ ___* An external capacitor is used to set the delay time.___ ___* High input sensitivity: VT=11.5mVrms Typ.___ ___* Low-current dissipation (at RIREF=180kΩ)___ ___In stand-by condition: IS=610μA Typ.___ ___* High stabilities design___ ___Adopt the circuits that is not affected by fluctuations of supply___ ___voltage/ambient temperature.___	___7.0 ~ 12.0___	___SOP-16___ ___SOP-16N___
___M54123L___	___Earth Leakage Current Detector___ ______ ___* With good input sensitivity current temperature characteristics___ ___* High input sensitivity :VT=6.1mV (Typ.)___ ___* Only need low external component count___ ___* High noise and surge-proof___ ___* Low power dissipation :PD=5mW (Typ.)___ ___* May be used both as 100V and 200V.___ ___* Wide temperature range : from -20 °C to +80°C___	___Vz=12.0V(Min)___	___DIP-8___ ___SOP-8___ ___SIP-8___
___M54123B___	___EARTH LEAKAGE CURRENT___ ___DETECTOR___ ______ ___* With good input sensitivity current temperature characteristics___ ___* High input sensitivity : VT=6.1mV (Typ.)___ ___* Only need low external component count___ ___* High noise and surge-proof___ ___* Low power dissipation : PD=5mW (Typ.)___ ___* May be used both as 100V and 200V.___ ___* Wide temperature range : from -20°C to +80°C___	___Vz=12.0V(Min)___	___SOP-8___
___M54223___	___Earth Leakage Current Detector___ ______ ___* With good input sensitivity current temperature characteristics___ ___* High input sensitivity :VT=6.1mV (Typ.)___ ___* Only need low external component count___ ___* High noise and surge-proof___ ___* Low power dissipation :PD=5mW (Typ.)___ ___* May be used both as 100V and 200V.___ ___* Wide temperature range : from -20 °C to +80°C___	___Vs=12.0V(Min)___	___DIP-8___ ___SOP-8___
___GM1851___	___Ground Fault Interrupter___ ______ ___* Internal power supply shunt regulator___ ___* Externally programmable fault current threshold___ ___* Externally programmable fault current integration time___ ___* Direct interface to SCR___ ___* Operates under line reversal; both load vs line and hot vs neutral___ ___* Detects neutral line faults___	___VZ=26.0(Typ)___	___DIP-8___ ___SOP-8___
___GV4145A___	___Low Power Ground Fault Interrupter___ ______ ___* No potentiomenter required___ ___* Direct interface to SCR___ ___* Supply voltage derived from AC line-26V shunt___ ___* Adjustable sensitivity___ ___* Grounded neutral fault detection___ ___* 450μA quiescent current___ ___* I deal for 120V or 220V systems___	___VZ=26.0(Typ)___	___DIP-8___ ___SOP-8___
___M54147___	___CMOS LEAKAGE___ ___PROTECTION CIRCUIT___ ______ ___* AC power supply___ ___* Drive SCR, the output pulse width greater than 30ms___ ___* Used to detect the A and AC signal___ ___* Same higher accuracy for different leakage signal___ ___* Excellent immunity to EMC___ ___* 110V~220V(50~60Hz)___	___4.7~4.9___	___SOP-8___
___M54149___	___CMOS LEAKAGE___ ___PROTECTION CIRCUIT___ ______ ___* AC power supply___ ___* Drive SCR, the output pulse width greater than 30ms___ ___* Used to detect the A and AC signal___ ___* Same higher accuracy for different leakage signal___ ___* Delay by external capacitor___ ___* 110V~220V(50~60Hz)___ ___* Width temperature range (TA=-30~+85°C)___ ___* Available in SOP14 packages___	___4.65~4.95___	___SOP-14___
___GV4145A-Q___	___Low Power Ground Fault Interrupter___ ______ ___* No potentiomenter required___ ___* Direct interface to SCR___ ___* Supply voltage derived from AC line-26V shunt___ ___* Adjustable sensitivity___ ___* Grounded neutral fault detection___ ___* 450μA quiescent current___ ___* I deal for 120V or 220V systems___	___VZ=26.0(Typ)___	___SOP-8___
___MA2803___	___EARTH LEAKAGE DETECTOR___ ______ ___* Low Power Consumption: 5mW, 100V / 200V___ ___* Built-in Voltage Regulator___ ___* High-gain Differential Amplifier___ ___* 0.4mA Output Current Pulse to Trigger SCRs___ ___* Low External Part Count___ ___* High Noise Immunity, Large Surge Margin___ ___* Super Temperature Characteristic of Input Sensitivity___ ___* Wide Operating Temperature Range: TA = −25°C to +80°C___ ___* Operation from 12V to 20V Input___	___Vz=12.0V(Min)___	___SOP-8___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."