Hall Sensor

___Hall Effect Switches > Hall Sensor___

___Part No.___ ______ (勾選方式)	___Features___	Vcc(MIN)(V) (Range)	Vcc(MAX)(V) (Range)	ICC(mA) (Range)	___Pole detection___ ______ (勾選方式)	___Output Type___ ______ (勾選方式)	___Operating Temperature(℃)___ ______ (勾選方式)	___Bop Max (gauss)___ ______ (勾選方式)	___Brp Min(gauss)___ ______ (勾選方式)	___Bhys TYP(gauss)___ ______ (勾選方式)	___Package___ ______ (勾選方式)
___UHE4913___	___Micro Watt Low Power Bipolar CMOS Hall Effect Switch___ ___(High level when no magnetic field is applied)___ ______ ___* Micropower Operation___ ___* 2.4V to 5.5V Battery Operation___ ___* Switching for both poles of magnet___ ___* Offset Canceling Technology___ ___* Superior Temperature Stability___ ___* Extremely Low Switch-Point Drift___ ___* Insensitive to Physical Stress___	2.4	5.5	0.02	___Omnipolar___	___open-drain___	___-40 to 85___	___50___ ___-50___	___12___ ___-12___	___16___	___SOT-23___ ___SIP-3___
___UH8100___	___Micro Watt Low Power CMOS Hall Effect Switch___ ___(Tperiod<100mS, Duty 0.1% Typ.)___ ______ ___* Micro power Operation___ ___* 2.5V to 5.5V Battery Operation___ ___* Offset Canceling Technology___ ___* Superior Temperature Stability___ ___* Extremely Low Switch-Point Drift___ ___* Insensitive to Physical Stress___	2.5	5.5	0.01/0.5	___Unipolar___	___open-drain___	___-40 to 85___	___60___	___10___	___10___	___SOT-23___
___UH8102___	___Micro Watt Low Power Bipolar CMOS Hall Effect Switch___ ___(Low level when no magnetic field applied)___ ______ ___Micropower Operation___ ___2.4V to 5.5V Battery Operation___ ___Offset Canceling Technology___ ___Superior Temperature Stability___ ___Extremely Low Switch-Point Drift___ ___Insensitive to Physical Stress___	2.4	5.5	0.02	___Omnipolar___	___open-drain___	___-40 to 85___	___70___	___1___	___10___	___SIP-3___ ___SOT-23___
___UH8103___	___Micro Watt Low Power Bipolar CMOS Hall Effect Switch IC___ ___(Tperiod 60ms Typ., Duty 0.3% Typ.)___ ______ ___Micropower Operation___ ___2.5V to 5.5V Battery Operation___ ___Offset Canceling Technology___ ___Independent of North or South Pole Magnet___ ___Superior Temperature Stability___ ___Extremely Low Switch-Point Drift___	2.5	5.5	0.01	___Omnipolar___	___open-drain___	___-40 to 85___	___75___ ___-75___	___10___ ___-10___	___15___	___SOT-23___ ___SIP-3___
___UH8104___	___Hall Effect Micro Switch IC___ ___(0 magnetic characteristics of output is OFF)___ ______ ___* Micro power operation___ ___* 2.5V to 5.5V battery operation___ ___* Offset Canceling Technology___ ___* Independent of North or South Pole Magnet___ ___* Superior temperature stability___ ___* Extremely Low Switch-Point Drift___	2.5	5.5	0.01	___Omnipolar___	___open-drain___	___-40 to 85___	___60___ ___-60___	___10___ ___-10___	___10___	___SIP-3___ ___SOT-23___
___UH8105___	___Micro Watt Low Power Bipolar CMOS Hall Effect Switch___ ___(High level when no magnetic field applied)___ ______ ___Micropower operation___ ___2.5V to 5.0V battery operation___ ___Offset Canceling Technology___ ___Independent of North or South Pole Magnet___ ___,Superior temperature stability___ ___Extremely Low Switch-Point Drift___	2.5	5.5	0.01	___Omnipolar___	___push-pull___	___-40 to 85___	___45___ ___-45___	___10___ ___-10___	___10___	___SIP-3___ ___SOT-23___
___UH8108___	___DIGITAL HALL-EFFECT___ ___SENSOR Ics___ ______ ___* Omnipolar detection (polarity detection for both S and N features___ ___dual outputs)___ ___* Push-pull output does not require external pull-up resistor___	2.8	5.5	0.003	___Omnipolar___	___push-pull___	___-40 to 85___	___110___ ___-110___	___20___ ___-20___	___15___	___SOT-23___
___UH8109___	___LOW CURRENT___ ___CONSUMPTION OMNIPOLAR___ ___DETECTION TYPE HALL___ ___EFFECT SWITCH IC___ ______ ___* Power supply voltage range: VDD = 2.7V ~ 5.5V___ ___* Pole detection: Detection of omnipolar___ ___* Output logic: Active "L"___ ___* Output form: CMOS output___ ___* Magnetic sensitivity: BOP = 7.0mT typ.___ ___* Operating cycle (Current consumption):___ ___Product with omnipolar detection___ ___tCYCLE = 30.50ms (IDD = 4.0μA) typ.___	2.7	7	0.008	___Omnipolar___	___push-pull___	___-40 to 85___	___85___ ___-85___	___37___ ___-37___	___18___	___SOT-23___
___UH8111___	___CMOS, UNI-POLAR, LOW___ ___POWER HALL SENSOR___ ______ ___* Unipolar detection___ ___* 2.2V to 5.5V battery operation___ ___* Offset Canceling Technology___ ___* Superior temperature stability___ ___* Extremely Low Switch-Point Drift___	2.5	5.5	0.006	___Unipolar___	___push-pull___	___-40 to 85___	___45___	___3___	___9___	___SOT-23___
___UH8118___	___CMOS, OMNI-POLAR, LOW___ ___POWER HALL SENSOR___ ______ ___* Omni-polar magnetic type___ ___* 2.2V to 5.5V battery operation___ ___* Offset Canceling Technology___ ___* Independent of North or South Pole Magnet___ ___,* Superior temperature stability___ ___* Extremely Low Switch-Point Drift___	2.2	5.5	0.006	___Omnipolar___	___push-pull___	___-40 to 85___	___40___ ___65___	___6___ ___8___	___5___ ___7___	___SOT-23___
___SK1812___	___Bipolar Latch Type Hall Effect for High Temperature Operation___ ______ ___* Wide supply voltage range of 2.5V to 20V___ ___* Wide temperature operation range of -20℃~+125℃___ ___* Alternating magnetic field operation___ ___* TTL and MOS IC are directly drivable by the output___ ___* The life is semipermanent because it employs contactless parts___ ___* SIP-3 and SOT-23 package___	2.5	20	6	___Bipolar___	___open-drain___	___-20 to 125___	___50___	___-50___	___100___	___SIP-3___ ___SOT-23___
___SK1816___	___Bipolar Latch Type Hall Effect for High Temperature Operation___ ______ ___* Wide Temperature Operation Range of -30°С ~+125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___ ___* SIP-3 and SOT-23 Package are Available.___	-	20	10	___Bipolar___	___open-drain___	___-30 to 125___	___50___	___-50___	___100___	___SIP-3___ ___SOT-23___
___SK1816A___	___Bipolar Latch Type Hall Effect for High Temperature Operation (Built-in Pull-High Resistance)___ ______ ___ Wide Supply Voltage Range of 2.5V to 20V___ ___* Wide Temperature Operation Range of -30°С ~+125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	2.5	20	10	___Bipolar___	___pull-up___	___-30 to 125___	___50___	___-50___	___55___	___SIP-3___ ___SOT-23___
___SK1901___	___Low Voltage Hall Effect Switch for High Temperature Operation___ ______ ___* Wide supply voltage range of 2.5V to 20V___ ___* Wide temperature operation range of -20°С~+125°С___ ___* TTL and MOS IC are directly drivable by the output___ ___* The life is semipermanent because it employs contact-less parts___	2.5	20	10	___Unipolar___	___open-drain___	___-20 to 125___	___100___	___10___	___45___	___SIP-3___ ___SOT-23___ ___TSOT-23___
___SK1826___	___BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION___ ___* Wide Supply Voltage Range of 2.5V to 24V___ ___* Wide Temperature Operation Range of -30°С ~+125°С___ ___* Alternating Magnetic Field Operation___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	3.6	24	6	___Bipolar___	___open-drain___	___-30 to 125___	___50___	___-50___	___100___	___SIP-3___ ___SOT-23___
___UHS39___	___LINEAR HALL EFFECT___ ___SENSOR___ ______ ___* Low-Noise Output___ ___* 3.0 V ~ 6.5 V Operation___ ___* Magnetically Optimized Package___ ___* Miniature construction___ ___* Linear output for circuit design flexibility___ ___* Wide ambient temperature range: -40°C ~ +85°C___	3.0	6.5	8	___Linear___	___-___	___-40 to 85___	___-___	___-___	___-___	___SOT-23___
___UHS49___	___LINEAR HALL EFFECT___ ___SENSOR___ ___* Low-Noise Output___ ___* 3.0 V ~ 6.5 V Operation___ ___* Magnetically Optimized Package___ ___* Miniature construction___ ___* Linear output for circuit design flexibility___ ___* Wide ambient temperature range: -40°C ~ +85°C___	3	6.5	8	___Linear___	___-___	___-40 to 85___	___-___	___-___	___-___	___SIP-3___
___USS30A___	___BIPOLAR LATCH TYPE HALL___ ___EFFECT FOR___ ___HIGH-TEMPERATURE___ ___OPERATION___ ______ ___* Wide Temperature Operation Range of -30°С ~ +125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	4.5	28	10	___Bipolar___	___open-drain___	___-30 to 125___	___110___	___-110___	___220___	___SOT-23___
___USS40___	___BIPOLAR LATCH TYPE HALL___ ___EFFECT FOR___ ___HIGH-TEMPERATURE___ ___OPERATION___ ______ ___* Wide Temperature Operation Range of -40°С~+125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* Withstand Voltage 50V___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	4.5	24	10	___Bipolar___	___open-drain___	___-40 to 125___	___70___	___-70___	___130___	___SIP-3___
___USS40A___	___BIPOLAR LATCH TYPE HALL___ ___EFFECT FOR___ ___HIGH-TEMPERATURE___ ___OPERATION___ ______ ___* Wide Temperature Operation Range of -30°С ~+125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	4.5	28	10	___Bipolar___	___open-drain___	___-30 to 125___	___110___	___-110___	___220___	___SIP-3___
___USS50A___	___BIPOLAR LATCH TYPE HALL___ ___EFFECT FOR___ ___HIGH-TEMPERATURE___ ___OPERATION___ ______ ___* Wide Temperature Operation Range of -30°С ~ +125°С___ ___* Alternating Magnetic Field Operation___ ___* Built-in Protection Diode___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___	4.5	28	10	___Bipolar___	___open-drain___	___-30 to 125___	___110___	___-110___	___220___	___SOT-89___
___SK8552___	___Low Voltage Hall effect switch___ ______ ___* Wide supply voltage range of 3V to 20V___ ___* Wide temperature operation range of -20℃~+125℃___ ___* TTL and MOS IC are directly drivable by the output___ ___* The life is semipermanent because it employs contactless parts___ ___* Equipped with an output pull-up resistor ( typical 20kΩ)___	3	20	5	___Omnipolar___	___pull-up___	___-20 to 125___	___100___ ___-100___	___20___ ___-20___	___-___	___SIP-3___ ___SOT-25___
___SK8509___	___Bipolar Linear Type Hall Effect IC___ ___Sensitivity 1.3mV/Gauss typical___ ______ ___* Wide Supply Voltage Range of 4V to 7V___ ___* Wide Temperature Operation Range of -20°С ~+85°С___ ___* The Life is Semipermanent because it Employs Contactless Parts___	4	7	10	___Linear___	___-___	___-20 to 85___	___-___	___-___	___-___	___SIP-3___ ___SOT-23___
___U3144___	___Sensitive Hall-Effect Switches For High-Temperature Operation___ ______ ___* Wide temperature operation range of -40°С ~ +85°С___ ___* Wide supply voltage range of 4.5V to 24V___ ___* TTL and MOS IC are directly drivable by the output___ ___* Reverse Battery Protection___ ___* Activate with Small, Commercially Available Permanent Magnets___ ___* Solid-State Reliability___ ___* SOT-89 package___ ___* Resistant to Physical Stress___	4	24	9	___Unipolar___	___open-drain___	___-40 to 85___	___350___	___50___	___25___	___SOT-89___
___UHS41___	___Hall Effect Latched Sensor___ ______ ___* wide operating voltage range：4.5V~24V___ ___* Wide ambient temperature range: –40°~+125°C___ ___* Bipolar technology___ ___* Open-collector 25mA output___ ___* Reverse battery protection___ ___* Solid-state reliability___ ___* Resistant to physical stress___ ___* Activate with small, commercially available permanent magnets___	4.5	24	10	___Bipolar___	___open-drain___	___-40 to 125___	___70___	___-70___	___75___	___SIP-3___ ___SOT-23___
___UHS351___	___OMNIPOLAR HALL-EFFECT___ ___DIGITAL POSITION SENSOR___ ______ ___* Simple activation from a North pole or a South pole and sensitive___ ___magnetics makes this omnipolar product suitable in all kinds of lid___ ___closure detection, potential motion control, and displacement___ ___sensing applications___ ___* Built-in reverse polarity protection prevents the device from___ ___potential damage during installation___ ___* Low voltage 3V ability helps reduce power consumption___ ___* Thermally balanced integrated circuit provides for stable operation___ ___over a wide temperature range of -40° ~ 150 °C___	3	28	9	___Omnipolar___	___open-drain___	___-40 to 150___	___135___ ___-135___	___10___ ___-10___	___35___	___SOT-23___
___UH495___	___SOLID STATE SENSORS___ ___MINIATURE RATIOMETRIC___ ___LINEAR___ ______ ___* Low power consumption___ ___* Single current sinking or current sourcing linear output___ ___* Rail-to-rail operation provides more useable signal for higher___ ___accuracy___ ___* Operating temperature range of -40 ~ +150°C___ ___* Responds to either positive or negative gauss___ ___* Quad Hall sensing element for stable output___	4.5	10.5	8.7	___Linear___	___-___	___-40 to 150___	___-___	___-___	___-___	___SIP-3___
___UH4921___	___Dynamic Differential Hall Effect Sensor IC with Digital Signal Output___ ___* Digital output signal___ ___* Low cut-off frequency___ ___* High sensitivity___ ___* Symmetrical thresholds___ ___* Reduced power consumption___ ___* AC coupled___ ___* Output protection against electrical disturbances___ ___* Large temperature range___ ___* Large airgap___ ___* Protection against overvoltage___ ___* Protection against reversed polarity___ ___* Two-wire and three-wire configuration possible___ ___* Advanced performance___ ___* South and north pole pre-induction possible___ ___* High piezo resistivity___	-	24V	15	___DYNAMIC DIFFERENTIAL___	___open-drain___	___150___	___-___	___-___	___-___	___SIP-4___
___USS443___	___TEMPERATURE___ ___COMPENSATION BIPOLAR___ ___HALL EFFECT SENSOR___ ______ ___Small size package___ ___ High sensitivity and fast response___ ___* Withstand voltage 50V___ ___* TTL and MOS IC are directly drivable by the output___ ___* Reverse Battery Protection___ ___* Sensitivity to temperature compensation___	4.5	24	10	___Unipolar___	___open-drain___	___-40 to 125___	___180___	___150___	___50___	___SOT-89___
___UHC288___	___HIGH VOLTAGE BUITLT-IN PULL HIGH RES OMNIPOLAR HALL EFFECT SWITCH___ ______ ___* Operation range from 3.0V to 26V * Omni polar, output switches with absolute value of North or South pole from magnet * Reverse bias protection on power supply pin * High Sensitivity for reed switch replacement applications * Low sensitivity drift in crossing of Temp range___	3	26	5	___Omnipolar___	___pull-up___	___-40 to 85___	___±85___ ___±110___	___±15___ ___±30___	___20___	___SIP-3___ ___SOT-23___ ___SOT-25___
___UHC288C___	___HIGH VOLTAGE BUITLT-IN PULL HIGH RES OMNIPOLAR HALL EFFECT SWITCH___ ______ ___* Operation range from 3.0V to 26V___ ___* Omni polar, output switches with absolute value of North or South___ ___pole from magnet___ ___* Reverse bias protection on power supply pin___ ___* High Sensitivity for reed switch replacement applications___ ___* Low sensitivity drift in crossing of Temp range___	3	26	5	___Omnipolar___	___-___	___-40 to 85___	___540___ ___-540___	___230___ ___-230___	___40___	___SIP-3___ ___SOT-23___
___UHC188___	___SINGLE OUTPUT HALL EFFECT LATCH___ ______ ___* 2.8V~30V DC operation voltage___ ___* Temperature compensation___ ___* Wide operating voltage range___ ___* Open-Drain pre-driver___ ___* 25mA maximum sinking output current.___	2.8	32	4.5	___Bipolar___	___open-drain___	___-40 to 125___	___40___ ___60___	___-5___	___40___ ___70___	___SOT-23___ ___SIP-3___
___UHC177___	___SINGLE OUTPUT HALL___ ___EFFECT LATCH___ ______ ___* 3.3V~20V DC operation voltage___ ___* Temperature compensation___ ___* Wide operating voltage range___ ___* Open-Drain pre-driver___ ___* 25mA maximum sinking output current.___	3.3	20	4.5	___Bipolar___	___open-drain___	___-40 to 85___	___40___ ___60___	___-5___	___40___ ___70___	___SOT-23___ ___SIP-3___
___SK1816M___	___Latch Type Hall Effect For High Temperature___ ______ ___* Wide Temperature Operation Range of -30°С ~ +125°С___ ___* Alternating Magnetic Field Operation___ ___* TTL and MOS IC are Directly Drivable by the Output___ ___* The life is Semi Permanent because it Employs Contact-Less Parts___ ___* SIP-3 and SOT-23 Package are Available.___	3.6	20	6	___Bipolar___	___open-drain___	___-30 to 125___	___50___ ___50___	___-50___ ___-50___	___100___ ___100___	___SIP-3___ ___SOT-23___
___U349___	___SENSITIVE HALL-EFFECT___ ___SWITCHES FOR___ ___HIGH-TEMPERATURE___ ___OPERATION___ ______ ___* Wide temperature operation range of -40°С ~ +85°С___ ___* Wide supply voltage range of 4.5V to 24V___ ___* TTL and MOS IC are directly drivable by the output___ ___* Reverse Battery Protection___ ___* Activate with Small, Commercially Available Permanent Magnets___ ___* Solid-State Reliability___ ___* Resistant to Physical Stress___	4.5	24	9	___Unipolar___	___open-drain___	___-40 to 85___	___460___	___135___	___100___	___SOT-23___ ___SOT-89___
___UHC182___	___SINGLE OUTPUT HALL EFFECT LATCH___ ______ ___* 2.8V~30V DC operation voltage___ ___* Temperature compensation___ ___* Wide operating voltage range___ ___* Open-Drain pre-driver___ ___* 25mA maximum sinking output current.___	2.8	32	4.5	___Bipolar___	___open-drain___	___=K18___	___40___ ___60___	___-5___	___40___ ___70___	___SOT-23___ ___SIP-3___
___UHC1816___	___SINGLE OUTPUT HALL EFFECT LATCH___ ______ ___* 3.0V~26V DC operation voltage___ ___* Temperature compensation___ ___* Wide operating voltage range___ ___* Open-Drain pre-driver___ ___* 25mA maximum sinking output current.___	3	28	4.5	___Bipolar___	___open-drain___	___-40 to 125___	___20___	___-5___	___30___	___SIP-3___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."