Shunt Reference Regulator+Op+Comp (Combo IC)

___Power Management > Shunt Reference Regulator+Op+Comp (Combo IC)___

___Part No.___ ______ (勾選方式)	___Features___	___Function___ ______ (勾選方式)	Vcc (V) Min (Range)	Vcc (V) Max (Range)	Icc (mA) Min (Range)	Icc (mA) Max (Range)	___VREF for CV (V)___ ______ (勾選方式)	___ VREF for CC (mV)___ ______ (勾選方式)	___ Constant Voltage Reference Tolerance (%)___ ______ (勾選方式)	___ Package___ ______ (勾選方式)
___UM601A___	___Voltage and Current Controller (Vref+1 Op+2 for Charger)___ ______ ___* 1.24V Series Voltage Reference with 10mA Output Current and 1% Precision (UM601A)___ ___* Two Operational Amplifiers with ORed Output and 1MHz Gain Bandwidth Product___ ___* Built-In Current Generator with Enable / Disable Function___ ___* 4.5 ~ 32V Supply Voltage Range___	___* Vref+1 and Op+2___	4.5	32	-	2	___1.24___	___-___	___±1___ ___±2.5___	___DIP-8___ ___SOP-8___
___UM602A___	___Dual Operational Amplifier-Dual Comparator and Adjustable___ ___Voltage Reference (Vref+1 Op+2 Comp+2 for Charger)___ ______ ___OPERATIONAL AMPLIFIERS___ ___Low supply current: 200μA/amp.___ ___Medium speed: 2.1MHz___ ___Low level output voltage close to VCC - : 0.1V typ.___ ___Input common mode voltage range includes ground COMPARATORS___ ___Low supply current: 200μA/amp. (VCC=5V)___ ___Input common mode voltage range includes ground___ ___Low output saturation voltage: 250mV(IO=4mA) REFERENCE___ ___ Adjustable output voltage: VREF to 32V___ ___* Reference voltage tolerance___ ___UM602A-1: ±0.4%___ ___UM602A-2: ±1%___ ___* Sink current capability: 1~100mA___	___* Vref+1 Op+2 Comp+2___	3	32	-	-	___2.5___	___-___	___±0.4___ ___±1___	___DIP-16___ ___SOP-16___
___UM603A___	___Dual Operational Amplifier and Current Controller (Vref+1 Op+2 for Charger)___ ______ ___OPERATIONAL AMPLIFIER___ ___* Low input offset voltage: 0.5mV typ. for UTC UM603A___ ___* Low supply current: 350uA/op.(@ VCC= 5 V)___ ___* Medium bandwidth(unity gain): 0.9MHz___ ___* Large output voltage swing: 0 V ~ (VCC-1.5 V)___ ___* Input common mode voltage range includes ground___ ___* Wide power supply range: 3V ~ 32V ±1.5 ~ ±16V___ ______ ___VOLTAGE REFERENCE___ ___* Fixed output voltage reference 2.5V___ ___* Reference voltage tolerance___ ___UM603A-1: ±0.4%___ ___UM603A-2: ±1%___ ___* Sink current capability : 1 ~ 100mA___ ___* Typical output impedance : 0.2Ω___	___* Vref+1 and Op+2___	3	32	-	2	___2.5___	___-___	___±0.4 / ±1___	___SOP-8___ ___TSSOP-8___
___UM604A___	___Quad Operational Amplifier and Programmable___ ___Voltage Reference (Vref+1 OP+4 Comp for Charger)___ ______ ___OPERATIONAL AMPLIFIER___ ___* Low supply current : 375μA/op. (@ VCC= 5 V)___ ___* Low input bias current : 20nA___ ___* Medium speed : 0.9MHz___ ___* Low input offset voltage : 0.5mV typ for UM604___ ___* Wide power supply range: ±1.5 ~ ±15V___ ___VOLTAGE REFERENCE___ ___* Adjustable output voltage : VREF to 36V___ ___* Reference voltage tolerance___ ___UM604A-1: ±0.4%___ ___UM604A-2: ±1%___ ___* Sink current capability : 1 ~ 100mA___ ___* Typical output impedance : 0.2Ω___	___* Vref+1 OP+4 Comp___	3	32	-	4	___2.5___	___-___	___±0.4___ ___±1___	___DIP-16___ ___SOP-16___
___UM605A/B___	___Dual Operational Amplifier and Current Controller Shunt Regulator (A=2.5V B=1.25V)___ ______ ___* Internal accurate 2.5V / 1.25V VREF___ ___* Reduced external components___	___* Vref+1 and Op+2___	4	20	1.2	1.7	___2.5___ ___1.25___	___152~160___	___±2___	___SOT-25___
___UM606___	___Dual Operational Amplifier and 1.21V Voltage Reference with ±1% for CC and CV Controlling___ ______ ___Constant Voltage and Constant Current Control___ ___Precision Internal Voltage Reference___ ___Few External Components___ ___Easy Compensation___	___* Vref+1 and Op+2___	2.5	18	0.6	1.2	___1.21___	___200___ ___70___	___±1___ ___±2___	___SOT-26___
___UM607___	___Power Management > Dual Operational Amplifier and Shunt Regulator CC and CV Control for Battery Charger & Adaptor___ ______ ___* Constant Voltage Control (CV) and Constant Current Control (CC)___ ___* Input voltage ranging from 2.2V to 14V___ ___* 40mA photo coupler drive current typically___ ___* 1mA maximum operating current___ ___* Internal Precision Voltage Reference : 1.240V ± 1%___ ___* Easy compensation and low external component count.___	___* Vref+1 and Op+2___	2.2	14	0.6	1	___1.24___	___150___ ___70___	___±1___	___SOT-26___
___UM608___	___Constant Voltage And Constant Current Controller For Battert Chargers___ ______ ___* Constant Voltage and Constant Current Control___ ___* Precision Internal Voltage Reference___ ___* Few External Components___ ___* Easy Compensation___ ___* Charge status output for LED___ ___* build-in overvoltage protection for battery___	___* Vref+1 and Op+3___	5	32	2	4	___2.5___	___-___	___±4___	___SSOP-10___ ___MSOP-10___
___UM609A___	___Dual Operational Amplifier and Current Controller (Vref+1 Op+2 for Charger)___ ______ ___* Low supply current: 75uA/Per OP AMP.(@ VCC=5V)___ ___* Medium bandwidth(unity gain): 1MHz___ ___* Large output voltage swing: 0V ~ (VCC-1.5V)___ ___* Wide power supply range: 3V~36V VOLTAGE REFERENCE___ ___* Fixed output voltage reference 2.5V___ ___* Reference voltage tolerance___ ___UM609A-1: ±0.4%___ ___UM609A-2: ±1%___ ___* Sink current capability: 0.05~80mA___ ___* Typical output impedance: 0.2Ω___	___* Vref+1 and Op+2___	3	36	0.24	0.3	___2.5___	___-___	___±0.4___ ______ ___±1___	___SOP-8___ ___MSOP-8___
___UM610_A___	___Constant Voltage And Constant Current Controller___ ______ ___constant voltage and constant current control___ ___ Low supply current: 190uA___ ___* operating power supply range: 3.5V~36V___ ___* precision internal voltage reference 2.5V___ ___* low current sense threshold:30mV/50mV___ ___* easy compensation___ ___* low external component count___	___* Vref+1 and Op+2___	3.5	36	-	0.19	___2.5___	___30___ ___48___	___±0.5___	___SOT-26___
___UM611___	___Doule Constant Voltage Controllers___ ______ ___* Constant voltage control___ ___* Low supply current: 0.45mA (VCC=5V)___ ___* Easy compensation___ ___* Precision Internal Voltage Reference: 0.6V/0.8V___ ___* Low external component___ ___* Operating power supply : 3V~20V___	___* Op+2___	3	20	2.2	3.6	___0.8___	___0.6___	___±1___	___SOT-26___
___UM612_A___	___SPS SECONDARY-SIDE CC/CV CONTROLLER___ ______ ___* Secondary-Side Constant Voltage (CV) and Constant___ ___Current (CC) Control___ ___* 4.75V to 50V Operation Voltage Range___ ___* 0.6mA Quiescent Current___ ___* ±1% Output Voltage Accuracy at Full Temperature Range___ ___* Smooth Transition Between CC and CV Control Loops___ ___* -5V Negative Voltage Tolerance at CP pin___	___* Vref+1 and Op+2___	4.75	50	-	0.6	___2.5___	___30___ ___61___	___±0.5___	___SOT-26___
___UM21125___	___Single Operational Amplifier and Vref___ ______ ___* Single-Supply Operation___ ___* Low Operating Voltage: ±2.7V~20V___ ___* Low Operating Current: 1.3mA (Typ.)___	___* Op+1___	2.7	20	1.6	2.35	___-___	___68___	___±8___	___SOT-25___

This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."